logo
extend your senses
L
Aplikace snímačů Sensit

temperature
humidity
CO2
level
flow
position

Sensors of temperature, humidity and flow for air conditioning equipment


In the last years our requirements for comfort of the environment in which we live, work or spend our leisure time increase quite significantly. Due to these reasons there are utilised more and more frequently various types of air-conditioning units or whole systems, whilst their correct choice has a great influence on savings of energy.

One of the tasks of air-conditioning, depending on the existing internal and external effects, is to provide optimal temperature in the air-conditioned room. The company Sensit s.r.o. is engaged in development and production of temperature sensors that are integral components of air-conditioning systems and units.

The most important customers of the company Sensit s.r.o. include manufacturers of air-conditioning and cooling units as well as installation companies that are supported by sale warehouses of our business representatives within territory of the Czech Republic and Slovakia and other countries not only inside the EU.

MEASUREMENT OF TEMPERATURE IN A ROOM 

The stated sensors can have resistance, current, digital and frequency output. All sensors offer the possibility of casing two sensors and casing non-standard temperature sensors (DALLAS, TSic, KTY, SMT and others). The S 110 line of sensors is also manufactured in a design for explosive environments. 

S110
S110
S110
K110
K110
K110
S100
S100
S100

MEASUREMENT OF TEMPERATURE OF RETURN WATER 

The temperature sensor TR 080 suitable for providing sufficiently fast response of the connected system to a temperature drop of return water under the permitted limit. The sensor is installed standardly in a tube collector of the water exchanger. Clamp-on temperature sensors of the S 140 or S 150 series can be fixed directly onto the piping. Advantages of these sensors can be found in their easy dismantling in case of any failure without the necessity to discharge the medium. The S 140 line of sensors is also manufactured in a design for explosive environments.


TR 080
TR 080
TR 080
S140
S140
S140
S150
S150
S150

MEASUREMENT OF SUPPLY AIR TEMPERATURE 

For measurement of supply air temperature in pipes and air-conditioning ducts beyond the heater sensors with stainless steel shanks and heads with terminal boxes can be used. In case of operation at low temperatures the sen- sors can be used for protection against frost. The S 120 line of sensors is also manufactured in a design for explosive environments. Moreover, we offer the PTS 4x and PTS 6x line of temperature sensors in both resistance and with the option of installing programmable IPAQ and APAQ converters. 

MINI
MINI
MINI
S 120
S 120
S 120
PTS 4x a PTS 6x
PTS 4x a PTS 6x
PTS 4x a PTS 6x

HUMIDITY SENSORS 

Sensors of the PTSV series are designed for measurement of humidity and tempera- ture in air-conditioning applications as well as other industrial or residential rooms. The sensors are produced in designs for surface installation or installation on piping, with current outputs. In combination with sensors for detection of the dew point these sensors are used where it is necessary to prevent any condensation on surfaces, condensation on critical places of the equipment or in buildings (air-conditioning ducts, close to fans).


PTSV 110
PTSV 110
PTSV 110
PTSV 120
PTSV 120
PTSV 120
PTSV 130
PTSV 130
PTSV 130

FLOW SENSORS AND SWITCHES 


SNP a SPP
SNP a SPP
SNP a SPP

Flow sensors are designed for contact measurement of flow rate of gaseous media. Flow switches are designed for switching on load when air flow set value has been achieved. By combining the flow sensor or switch and the central holder, it is possible to use the meter in air conditioning ducts or pipes with voltage outputs. 

More news

New wireless radio sensors

We are glad to be part of the Rail Technology Roadshow thanks to our partner - Carlton Thermal Systems Ltd.

Read more
30/03/2023

Sensit at Rail Technology Roadshow

We are glad to be part of the Rail Technology Roadshow thanks to our partner - Carlton Thermal Systems Ltd.

Read more
13/03/2023

Invitation to the AMPER 2023 fair

Dear business friends, We would like to invite you to a traditional friendly meeting at the AMPER 2023 trade fair, which will take place from 21 to 23 March 2023 in Brno. We are looking forward to seeing you in Hall P, stand 3.27.

Read more

Temperature sensors for explosive environment

As an accessory we newly offer Zener barrier ZbC2+. It is certified as an intrinsically safe interface.

Read more
24/01/2023

Czech Crown Jewels exhibition

Czech Crown Jewels exhibition.  We are honoured that our temperature sensors have monitored the climatic conditions at the Czech Crown Jewels in combination with COMET SYSTEM instruments.

Read more

Exhibitions 2023

Dear Business Partners, The year 2023 is already in full swing, and we would like to inform you at which trade fairs we can meet this year.

Read more

Merry Christmas and Happy New Year 2023

Wish you all a Merry Christmas and happy christmas holiday and happy new year 2023 full of health and happiness.

Read more
15/12/2022

Combined indoor sensors

The core products, apart from temperature sensors, were mainly combined indoor temperature, relative humidity and CO2 sensors.We are able to offer these sensors in a configuration measuring up to 5 quantities.

Read more
15/11/2022

CO2 sensor to air condition ducts

We have introduced the main novelty item in our assortment, namely the CO2 sensor for measurement in air ducts under the designation KSC 520 and KSC 122.

Read more
31/10/2022

Chillventa 2022

Dear business partners, we would like to invite you to the International Exhibition of refrigeration, AC & Ventilation and Heat Pumps CHILLVENTA 2022, which will be held in term 11 – 13 Oct 2022 in Nuremberg. We are looking forward to meeting you in hall 5, stand 325.

Read more
27/09/2022

Veryfied and Reliable Temperature Sensors

Verified and reliable temperature sensors Dear customers, We would like to let you in on what happens to temperature sensors before they are packaged and shipped to you. After manufacturing, all temperature sensors are labelled with their own unique identification code and the entire batch is put into cycling chambers. In the chambers, the sensors undergo 7 to 10 temperature cycles from -10°C to 120°C depending on the sensor type. With this so-called burn-in (or ageing) process, we simulate the load on the sensor to detect any critical manufacturing defects.

Read more
26/08/2022

Innotrans 2022

INNOTRANS 2022 Dear business partners and railway vehicles lovers, After long four years gap, one of the largest international trade fairs for transport technology is taking place again, and we are glad to participate as well. You will find us in hall 27, at stand no. 701.

Read more

Temperature sensors for explosive environment

We have expanded our range of temperature sensors for explosive environment. For explosive environment, we offer temperature sensors with a connection head and cable sensors. The range of cable temperature sensors now includes the TR 141Ex contact temperature sensor.

Read more
28/02/2022

Rail Business Days Fair

Rail Business Days 2022 Dear Business Partners, We would like to let you know, that we can meet soon at the upcomming exhibition Rail Business Days 2022, which will be held in term 7 - 9 June 2022 in Brno.

Read more

Metrology and calibration

We have expanded our range of temperature sensors for explosive environment. For explosive environment, we offer temperature sensors with a connection head and cable sensors. The range of cable temperature sensors now includes the TR 141Ex contact temperature sensor.

Read more
21/03/2022

HANNOVER MESSE 2022 Fair

Dear friends, We are more then happy to invite you to the International Exhibition HANNOVER MESSE 2022, which will be held in term 30 May - 2 June 2022 in Hannover. We are looking forward to meeting you in hall 11, at stand no. B55.

Read more
23/05/2022

AMPER 2022 Fair

Dear Business Partners, We would like to let you know, that we can meet soon at the upcomming exhibition AMPER 2022, which will be held in term 17 - 20 May 2022 in Brno. We are looking forward to meeting you in hall V, at stand no. 4.11.

Read more
02/05/2022

Fanda Haman

Ing. Frantisek "Fanda" Haman, a founding member of SENSIT, he left us.

Read more
22/05/2022

EXHIBITIONS 2022

The year 2022 is already in full swing, and we would like to inform you at which trade fairs we can meet this year.

Read more
09/02/2022

Merry Christmas and Happy New Year 2022

Dear business partners, we would like to thank you all for a great cooperation in this so different year 2021 and we are looking forward to continue in cooperation in 2022 as well.

Read more
14/12/2021

CONTACT

SENSIT s.r.o.

Školní 2610, 756 61 Rožnov pod Radhoštěm


+420 571 625 571

bd06a3bd-41d0-4b35-87c7-36395df3c097
Send inquiry Set an appointment

PRODUCTS

QUICK LINKS

NEWSLETTER

Receive news and product information in your email.

© Copyright 2022 SENSIT s.r.o. | Školní 2610, 756 61 Rožnov pod Radhoštěm, Czech Republic | +420 571 625 571 | 5b3d978d-c111-489b-96b9-7b00f85e731d
All Rights Reserved. Webdesign: FlexiSystems s.r.o.: e-learning, webdesign, CMS.
...